How to Replace a Saab 9-3 Key
The Saab 9-3 is a car that has a large attraction for drivers. It is powerful and has excellent visibility. It has a very high safety rating.
It is vital to have two keys that are compatible for your vehicle. It could be costly to replace a key in the event that you lose it.
How to Replace the Ignition Key on the Saab 9-3
If the car key won’t engage in the ignition you must replace it. This guide will show you how to open a saab 93 without a key to replace the ignition key on a Saab 9-3. You will need a replacement key for saab 93 key with a reprogrammable battery as well as a new key-fob case.
The majority of modern Saab models use transponders instead of a metal key to unlock the car and start it. The problem with this is that the reprogrammable battery on the key-fob eventually wears out and will not hold a charge anymore. This is especially true if you use the same key for the lock you have.
The good news is that it can be replaced easily by a professional locksmith. If you have the proper tools, and a little patience you can do it yourself. The first step is to separate the key-fob. Insert an open-ended head into the slot in the middle of your case. You will need to take your time, as the plastic is extremely thin and can be damaged easily.
After the case is opened, you can create the new key by combining lower part of old key with a transponder and banana. This will ensure that the new key is mated to the CIM properly, which could make a huge difference when replacing the sole key for your Saab 9-3.
How do I replace the ignition Key in a Saab 900
Unless you have two keys, you will have to take off the steering wheel and dashboard in order to access the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you can take off all the trim pieces as well as dashboard pieces that surround the steering wheel. Once the dash is removed, you can put a screwdriver through the opening behind the ignition switch and take it out.
The ignition cylinder houses an ignition lock that could stop the vehicle from starting if the key isn’t inside it. If your 900’s ignition switch isn’t functioning, check the key to see if it’s in the lock or stuck in the barrel of ignition. It’s also an excellent idea to rotate your keys frequently and clean them regularly so that one doesn’t become bent.
Saab cars differ from other cars in that they don’t make use of traditional keys made of metal. The car instead recognizes the electronic signals coming from the key fob by using a special microchip in it.
If you lose your only working key fob, the dealer will charge you the highest dollar to replace your computer module (known as the CIM). We can reprogram the EEPROM on your current computer to enable it to accept new keys without the need for replacement. This can save you more than 50% of the price the dealer charges! This is the saab replacement key programming (https://4dagu.com/bbs/board.php?bo_table=free&wr_id=57210) KEY PROGRAM. Learn more about it here!
How to replace the ignition Key in a Saab9-5
The metal part of classic Saab keys is easy to duplicate and does not pose a significant threat to vehicle theft. The real protection is the electronic component that’s in the key fob, which has a chip inside that detects the car when it’s put into the ignition switch.
Saab’s anti-theft system has relied upon this technology for more than 10 years. It’s not as efficient as a physical lock for your door however, it makes the theft of your car much more difficult. This is the reason why every saab key replacement owner should keep a spare key on hand.
Most new Saabs come with two keys from the factory. However, you can upgrade them at an authorized dealer using a handheld computer referred to as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, which are more modern and newer features that require an ignition key.
The dealer will replace the CIM or TWICE module on those vehicles if all keys are lost, and charge you a high price for doing it. We can reprogram your computer’s EEPROM to accept new keys without replacing expensive modules.
How to replace the ignition Key in an XC90 saab key fob replacement
If your SAAB 9-3 key fob starts having issues turning the barrel of the lock it could be time to replace it. The process is quite simple and doesn’t require you to visit a dealer. You can complete the process at home, using a couple of basic tools.
You’ll first need to prepare the keys for your new car. Before starting, make sure that the anti-theft system is disabled by placing blocks on the rear wheels and engaging the handbrake. Put the key into the ignition and then turn the key to the “on” position. This will activate the accessories, but will not start the engine. Repeat this five times, and then keep the key in the “on” position.
The next step is to find a new case for your key fob. You can find them at any auto parts shop, and they’re typically quite affordable. You can buy them without electronics, based on the model.
To open the case you need to gently push the flathead screwdriver into the slot in the middle. The case will break easily, and when you’ve done that, you’ll have access to the internal electronics. Use a flathead screwdriver to gently pull out the electronics.
